Filter
Top Products
30
Surface Burners
Top burners require little care other than to wipe off the head of each burner. If a boilover occurs, the
burner cap can be easily lifted out so burner port holes can be cleaned in hot soapy water with a soft
brush. There are no bolts or screws to remove. The igniter must also be kept clean to ensure quick
positive starts. Simply lift the burner cap and clean. When replacing, be sure the tab is locked securely
in position on the burner base. For normal or everyday cleaning of light spills, wipe the burner caps
with a damp cloth. For heavy duty cleaning—cooked spills, oil stains, etc. scrub with a tub and tile type
of cleaner. Rinse thoroughly after every cleaning operation. Wipe away excess water. Avoid using
Oven and Closet Light Replacement
Before replacing lamp disconnect the power at the main fuse or circuit breaker panel. When replacing
light bulbs wait until the oven and bulb are cool. Remove oven light lens by simply unscrewing it counter
clockwise, the bulb can then be unscrewed easily. Always handle the bulb with a dry (never wet) cloth
to protect hands. If light bulb should break disconnect power to range by unplugging it or removing the
fuse from the panel before touching the bulb. Replace the bulb. Use only a 40 watt oven bulb available
at your local hardware store or appliance dealer.
When cleaning the oven, do not touch lens with a wet cloth.
WARNING!
Do not sit, lean, lift or stand on the doors
or drawers of this range as possible
injuries may result.
burner base
cap