Filter
Top Products
34
SETUP AND TROUBLESHOOTING
Burner Setup & Adjustment
installed.
You should check the following:
i) First check to make sure there are no gas leaks. Propane and natural gas have a very
distinct smell which is easily detected by the human nose. If in doubt, soak each pipe joint
with soapy water and look for bubbles.
ii) Check that all the controls are operating properly by lighting each of the burners. Turn
the burners on by pushing down and turning counter clockwise. Try them at low, medium
and high settings.
If everything checks out, you’re “cooking with gas”. If not, refer to the gas trouble shooting guide on Page 36.
Outer Cone
Inner Cone
Figure 8.