Heartland 5210 Range User Manual


 
2
STOVE
TOP
Gasket - Peel off backing
and stick on.
Bracket
Sheet metaI
screw (black)
Steel Washer Machine screw
(Nickel Plated)
-Remember when working with the closet, the closet is top heavy . Use your hand to support it during
installation.
-With a helper,lift closet assembly from box by area that is circled.(See Fig.1 Page 2).
-Rest the closet assembly on the carton,while your helper steadies the closet,peel the closet backing off
the gasket and stick one on each bracket.
-Place closet assembly onto stove body.(See diagram above).
Caution: In the case of the Glass cooktop models 8210,6210:
DO NOT REST CLOSET CORNER BRACKETS ON GLASS, to prevent damage to glass top.
-Line up holes in the bottom (foot) of the bracket with the holes in the stove top,while one person supports the
closet, fasten the closet brackets to the stove top with machine screws .
-To fasten the splashback to the rear of stove, with the Models 5210,6210 use 5 sheet metal
screws and washers. For Models 4210,8210 use 4 sheet metal screws and washers. To pre-
vent chipping do not overtighten or use power tools.
Gasket
Machine screw
Steel washer
Sheet metal
screw