Filter
Top Products
4
CONNECTING POWER TO THE CABINET
Plug the stove into wall receptacle.
Check all electrical functions of the
cabinet (fan,light, clock, etc.) and
check again that ALL screws have
been tightened before completeing the
installation.
Exhaust Hood Recptacle Locations
5210
4210
Back of
stove
Back of
stove
After your exhaust hood has been installed the very last thing to do is to connect the multipin plug
to the range. The receptacle is located at the rear of the stove under the metal cover. Remove the
screw securing the cover to the back of the range and remove the cover. Remove the cable clamp
from the stove which is located just above the cover.
Metal cover
Screw
Cable clamp
3-Pin plug and
receptacle
5-Pin plug and
receptacle
When installing the multi-pin plugs,
make sure the at sided pins are
aligned with at sided holes. Do not
force plug into receptacle.
Insert the 3 or 5 multi-pin plugs into
corresponding 3 or 5 pin receptacles.
Loop power cord on back and attach
power cord to stove back with cable
clamp and screw. Replace metal cover
with screw.