Filter
Top Products
– 18 –
For a R-L machine (steps 9-11):
9. Remove pipe (00-948761-00018) connecting the master drain and the nearest
drain tee. 00-948761-00018 can be discarded. See Fig. 16.
00-948761-00018
Fig. 16
10. Remove rubber hose connected to drain tee located at load end of the unit.
11. Swaploadenddrainteeincludingdraincapandclampwiththenon-angedrain
tee located at the unload end.
12. Remove two bolts and associated hardware that secures the solenoid valve to
the bracket. Retain these brackets and all hardware for use on load end
platform.
13. Loosen the clamps securing the two rubber hoses to the plastic drain tee and
barbedttingandremovehoses.
14. Unplug drain interlock switch from terminal block 8TB-10 and 8TB-11 in the
control box.
15. Remove drain assembly from platform by unthreading the brass tee from the
pipe nipple that connects the brass tee to the manual valve.
16. Remove drain interlock switch bracket located on the underside of the platform
and the bracket that secured the drain solenoid valve. Retain these brackets
and all hardware for use on load end platform.
17. Discard unload platform.
18. Attach magnet and magnet retainer with hardware, removed in step 2, to the
load end master drain handle weldment shipped with the machine. Ensure
white dot on magnet faces down. See Fig. 17.
DOWN
Fig. 17
19. Attach drain interlock switch bracket, removed in step 16, to the underside of
the load end master drain assembly platform shipped with the machine.
20. Assemble master drain plumbing, removed in step 15, to the load end platform.
Ensure the brass elbow points towards rear of unit.