Filter
Top Products
12
6.5 PREPARE FOR MIXING.
1. Place the mixing bowl on the bowl support.
2. Pour ingredients into the bowl.
3. Swing the bowl back to the mix position.
4. Place the agitator inside the bowl, and then attach it to
the agitator shaft (Fig. 7).
5. Lift bowl support.
6. Correctly close the bowl guard wire cage.
7. The mixer is now ready for mixing. (See TIMER OPERATION.)
6.6 OPERATING NOTES.
• STIR is to be used for incorporating ingredients. Do not use it to develop dough
products.
• If the mixer is stopped during a mixing operation, the timer also stops. The timer
starts again (with the time remaining) when the START button is pressed.
• Turn the TIME selector clockwise to take the mixer out of the hold mode.
6.7 TIMER OPERATION.
Using the Count-Up Mode (Continuous Mixing)
1. Turn the SPEED dial to select a mix speed (the SPEED setting can be changed at any
time during the mixing operation).
NOTE: STIR is to be used for incorporating ingredients. Do not use to develop dough
products.
2. Set the timer on hold by turning the TIME selector counterclockwise until HoLd appears
in the TIME window.
3. Press the START button to begin mixing. The timer starts counting forward from 00:00.
Fig. 7
Fig. 8