Hobart ML-134311 Mixer User Manual


 
6
Note: The mixer must only be used for the purpose it was designed and inline with the supplied
operating instructions.
Only use attachments that comply with CE regulations (CE marked).
5.1 DUST HAZARD.
In order to minimise any dust hazard follow the instructions detailed below.
When mixing ingredients care must be taken to avoid the inhalation of dust particles e.g. flour.
Reference should be made to product supplier's data sheets to ensure adequate
precautions/protections are taken.
Items such as flour must be added in such a manner to avoid dust particles being dispersed into the
local atmosphere.
Carefully slit the bag whilst holding in the lower part of the bowl. When mixing dry ingredient use the
lowest speed to minimise dust emission. Use a splash cover to reduce dust emissions (refer to the
recommended spare parts Section 9, page 30 for the cover part number). Mix the ingredients in the
bowl using the lowest speed until the risk of producing any dust is eliminated.
Fit suitable dust extraction equipment.
5.2 NEVER.
Operate the mixer or attachments if a fault develops or the mixer is unsafe.
Wear loose clothing.
Attempt to reach into the bowl when mixing.
Access rotating parts.
Fit the agitator to the mixer without a bowl in place.
Leave the agitator on machine without the bowl being fitted.
Operate the mixer with attachments and agitator fitted.
Use excessive force when operating which could affect the stability of the mixer.
Operate the mixer if parts are disassembled.
Over ride the safety switches fitted to the mixer.
Open the guard to stop machine.
Use the bowl lift to stop machine.
Use the mixer in an unsafe condition.
Clean the mixer with scouring powder or a scouring pad.
Clean aluminium agitators in dishwashers.
Inhale mixing ingredient dust particles.
5.3 ALWAYS.
Use the mixer in a well-lit area.
Ensure the bowl, agitator, attachment and guard are correctly fitted to the mixer.
Disconnect the mains electricity supply before cleaning the mixer.
Clean the mixer daily.
Remove agitator before using any attachments.
Stop mixer before adding more ingredients.
Use the stop button to stop machine.
Clean the bowl, agitators and attachments after use.
Clean the mixer using mild soap and water.