ArIadapter maybe used onlyon a 15-ampcircuit.
Do not use an adapter on a 20-ampcircuit.Where
localcodes permit, a~MPOWY
CONNE~ON maybe made to a properly
grounded two-prongwallreceptacle by the
use ofa UL-listedadapter,availableat most
hardware stores. me larger slotin the adapter
must be alignedwith the larger slot in the wall
receptacle to provideproper polari~ in the
connectionofthe power cord.
R.)
TEMPORARY METHOD
(ADAPTERPLUGS NOT
PERMITTED IN CANADA)
*#?ll
ALIGN LARGE
v
F-’ ENSUREPROPER
PRONGS/SLOTS
GROUNDAND
FIRM CONNECTION
BEFORE USE
CAmON: Attachingthe adapterground
terminal to the wallreceptaclecover screw
does not ground the applianceunless the cover
screw is metal, and not insulated,and the wall
receptacle is grounded through the house
wiring.The customer should havethe circuit
checked by a qualtied electricianto make sure
the receptacle is properly grounded.
When disconnecting the power cord from the
adapter, alwayshold the adapter with one hand. H
this is not done, the adapter ground terminal is
very likelyto break with repeated use. Should
~hishappen, Do NOT USE the applianceuntil a
?roper grotind has again been established.
——
E usageSatiationsw~he,e *ptiaeePower
cord
*be Diseonneded Prequentiy.
Do not use an adapterplugin these situations
because disconnectingofthe powercord places
(
undue strain onthe adapter and leads to eventual
failureofthe adapter ground terminal.me
customer shouldhave the two-~ron~wall
—
receptaclereplaced with a thre~-pro-ng
(grounding)receptacleby a qualifiedelectrician
before using the appliance.
me installationofappliancesdesigned for mobile
home installationmust conformwith the
ManufacturedHome Constructionand Safety
Standard,Title 24CF~ Part 3280(formerlythe
Federal Standard for MobileHome Construction
and Safety,Title 24,HUD,Part 280)or,when
such standard is not applicable,the Standard for
Mantiactured Home Installations,latest edition
~antiactured Home Sites,Communitiesand
Set-Ups),MSI A225.1,latest edition,or with
localcodes.
Ei@gB#ieoisa@Rna~~
1, hcate disconnectplug on the range back.
2. Pinch sides ofconnector and pullout of
range back.
ModeisEquippedwE~h
H@deBsEqui$#@dWtih
Zua#Eum@w
Ssa!sdBumen
,s , -“
-.
,/”~
,.,----
,/-—\
[
\
j
\.%._,,
‘
.-
x
\
{
!
‘\
>,
‘u. ...