Filter
Top Products
When electrical power is supplied or after power interruption, the last clock time
displayed before power was interrupted will flash, Time will advance and continue to
flash unti) clock is reset,
To set time of day
1. Touch Clock Pad.
indicator Word TIME will flash and time digits will remain in the Display. (if more
than fifteen seconds elapse between touching Clock Pad and touching an Arrow
Pad, Clock Pad must be touched again in order to set clock.)
2. Touch the Up or Down Arrow Pad(s) until correct time of day appears in the
Display.
Note: Four seconds later, the time of day will automatically be entered.
IMPORTANT
• TO recall time of day when another time function is showing: Touch Clock
Pad.
• To change time of day set on the clock: Repeat Steps 1 and 2 above.
• Clock time cannot be changed when oven has been programmed for Timed Bake,
Timed Convect Sake, Timed Conveet Roast or Self-clean. Cancel program before
reprogramming clock.
26