Filter
Top Products
Checkthe following list to be sure a servicecall isrealtynecessary. A quick reference
of this manualmay prevent an unneededservicecarl.
If grill or surface burner fails to light:
• check to be sure unitis properlyconnectedto power supply.
• check for a b}owncircuit fuse or a tripped main circuit breaker.
• check to be sure burnerports or ignition ports are not clogged.
• check to besure igniterisclicking. If igniterdoesn'tclick,turn control knobOffand
clean iginitor. (See p. 46.)
• check to be sure appliance regulator is set for correct fuel. (See installation
instructions.)
• check to be sure inletpressure is adequate. (Call gas company.)
If the flame is uneven:
• burner ports may be clogged.
• flame setting may needto be adjusted. (See p. 12-13.)
If grill or surface burner flame lifts off the ports:
• shutteron the mixertubeneeds to be closeduntil flamesettleson the burnerports.
(See pp. 12-13.)
If grill or surface burner flame is yellow in color:
• shutteron the mixertubeneedsto beopeneduntil yellowdisappears. (Seepp. 12-
13)
If nothing on the range operates:
• check for a browncircuit fuse or a tripped main circuit breaker,
• check if range is properly connectedto electric circuit in house.
If ventilation fan does not operate but everything else on the range
does:
• check behind lower access panel if power cord to blower assembly has been
disconnected.
If ventilation system is not capturing smoke efficiently:
• check on crossventilation in room or make up air.
• excessive amount of smoke is being created; check instructions for grilling,
trimming meats. (See pp. 18-20.)
• outside wail cap may be trapped shut.
• range may be improperlyinstalled;check ducting information. (See p. 9.)
• air filter may be improperlyinstalted (Seep. 10.)
5O