To set oven to start at future time and shut off automatically
1-4. Follow preceding steps 1-4 on pages 28.
5. Touch Stop Time Pad.
Indicator Words STOP TIME will flash. Display will show the calculated stop time
based on current time of day and cook time.
6. Touch the Up Arrow Pad to enter desired stop time.
A stop time can only be accepted for later in the day.
Note: Since food continues to cook if left in the oven, it is suggested that the clock
controls be used primarily to start the oven when no one is in the kitchen. Provisions
should be made to have the food removed as soon as the cook time is completed.
Example: If at 10 o'clock you set the oven for 350° convection baking and 2 hours
and 30 minutes cooking time, the calculated stop time would be "12:30". The
Display would show:
[12:90 '00.
If youwant the stoptime to be 1 o'clock,touch the Up Arrow Pad until1:00 appears
in the Display. The Display would show:
After four seconds, the Display will return to current time of day, thus showing:
jq,oo °
At the end of the delayed period, the DELAY Indicator Word will go off, the ON
Indicator Word will appear and the oven will begin to heat. 100° or the current oven
temperature, whichever is higher, will be shown. As the oven heats, the Display
will show a rise in increments of 50 until programmed temperature is reached.
At the end of programmed Cook Time, the oven will shut off automatically, four
beeps will be heard and "End" will appear in the Display. If oven is not cancelled,
"End" will remain in the Display and there will be one beep every minute for one
hour.
IMPORTANT
• To recall time function programmed: Touch the appropriate time pad.
• To cancel timed function only: Hold Cook Time Pad for four seconds. This will
only cancel cook time and stop time, not programmed bake mode.
• If more than fifteen seconds elapse between touching a function pad and touching
an Arrow Pad, the oven is not set and Display will return to previous Display.
29