Jenn-Air SDV48600P Convection Oven User Manual


 
The accesspanelis easilyopenedor removed. To - . .
open panel,grasp uppercornersand pull forward Catch
anddown. To closepanel,lift upandinsertprongs
into catches in the range.
To avoid thepossibilityofaccidentallydisconnect-
ing any part of the ventilationsystem, do not use
the area behind the access panel for storage.
To remove,pull forwardto the "stop" position; lift
up on the front of the rack and pull out.
Before replacingbulb, disconnectpowertooven at the mainfuseor circuitbreakerpanel
andat theelectricreceptacle. Be surethat the entireovencavity includingthelightbulb
is cool before attemptingto remove.
To replacelightbulb
1. Carefully unscrewthe glass lightlens,
2, To obtainfirm grasp on the bulb, wear protective f
rubbergloves. Removebyturning bulbto the left.
Do nottoucha hotovenlightbulb witha clampcloth
asbulb willbreak, Note: Ifthebulbdoesbreakand
you wish to remove it, be certain power supply is
disconnected and wear protective gloves. You
may contact your authorized Jenn-Air Service
Contractorfor service,
3. Replacebulb with a 40 watt oven-ratedappliance
bulb. A bulb witha brassbase is recommendedto
preventfusing of bulb into socket.
4. Replacebulb cover and reconnect power to oven. Reset clock.
47