Filter
Top Products
G Ulng
The grill consists of two black grill grates and a grill burner. Note: only install the grill
on the left side of your range.
To Install Grill Module
1. Before installing grill components, be certain control knobs are in the OFF position.
2. Position the grill burner with mixer tube openings towards the orifices. Slide the burner
towards the orifices until igniter is in between front and rear grill sections. Lower
into place until side openings are resting on the burner support pins.
3. Place the grill grates on the top of the range top.
"_ Note: Before using the grill for the first time, heat the E-ven Heat TM grill burner
to remove the black protective shipping coating. Heat the grill on Hi for 10
minutes and use the vent system to remove any additional smoke during
cooling. When the E-ven Heat grill burner is a dull black, it is ready to use.
To Remove Grill Module
1. Remove grill components once they are cool. Be sure control knobs are in the OFF
position.
2. Remove grill grates.
3. Remove grill burner.
17