Filter
Top Products
Oth er Hints o n
Caring for Your Range
How To Remove Range For Cleaning
Or Servicing
When necessary, follow these procedures to remove appliance for cleaning
or servicing:
1. Shut-off gas supply to appliance.
2. Disconnect electrical supply to appliance.
3. Disconnect gas supply tubing to appliance.
4. Remove screws that secure appliance to cabinet or floor. Remove
appliance from cabinet.
5. Reverse procedures to reinstall.
6. Test all joints for gas leaks with soap and water solution.
NEVER USE A MATCH OR OTHER FLAME TO LOCATE A GAS LEAK.
Aceess Door
The access door is easily removed to clean under
the range if necessary. To remove door, pull door
down and lift off pivot points. To replace door,
slide door over pivot points; lift up and insert
prongs into holes in the range.
To avoid the possibility of accidentally
disconnecting any part of the ventilation system,
do not use the area behind the access door for
storage.
46