Filter
Top Products
3. Push ENTER button to enter new stop time.
NOTE: If more than 7 seconds elapse between holding in START TIME button
or STOP TIME button and turning the SET dial, the display window will
automatically return to on-going program.
NOTE: If more than 1 minute elapses between turning SET dial to a new time and °
entering new START TIME and STOP TIME, the entire program will be
cancelled and display will return to time of day clock.
To stop cleaning process before lock indicator light comes on:
1. Move the DOOR LOCK LEVER to the left.
2. Turn SELECTOR and TEMPERATURE knobs from CLEAN to OFF.
3. Push CANCEL button twice.
To stop cleaning process after lock indicator light comes on:
1. Push CANCEL button twice.
2. Leave the TEMPERATURE and SELECTOR knobs in the CLEAN position.
3. Allow oven to cool until the LOCK INDICATOR LIGHT goes out. This may take
up to 45 minutes, depending on how long the oven has been on.
4. After LOCK INDICATOR LIGHT goes off, move the DOOR LOCK LEVER to
the left.
5. Turn SELECTOR and TEMPERATURE knobs from CLEAN to OFF.
NOTE: When SELECTOR knob is turned to CLEAN, a fan comes on. If this fan
is not operating, the oven will go through the self-cleaning process at a reduced
oven temperature and the oven will not clean effectively. If the fan does not operate,
contact your Jenn-Air Authorized Service Contractor for service.
44