Filter
Top Products
Before You Call
for Service
I
Check the following list to be sure a service call is really necessary. A quick reference
of this manual, as well as reviewing additional information on items to check, may
prevent an unneeded service call.
If nothing on tile range operates:
• check for a blown circuit fuse or a tripped main circuit breaker.
• check if range is properly connected to electric circuit in house.
If ventilation fan does nol ol, erate hut ever).thlng else on tile range
does:
• check behind lower access door if power cord to blower assembly has been
disconnected.
If grill or surface burner fails to light:
• check to be sure unit is properly connected to power supply.
• check for a blown circuit fuse or a tripped main circuit breaker.
• check to be sure burner ports or ignition ports are not clogged.
• check to be sure regulator is set for the correct fuel.
• check to be sure inlet pressure is adequate.
• clean igniter (see p. 22).
if tile flame is uneven:
• burner ports may be clogged.
• flame setting may need to be adjusted (see pp. 10-11).
If grill or surface burner i_ame lifts off the l)Or_:
• shutter on the mixer tube needs to be closed until flames settle on the burn
ports (see p. 10).
If grill or surface burner 13ame is yellow in color:
• shutter on the mixer tube needs to be opened until yellow disappears (see
p. 10).
If ventilation system is not capturing smoke efficiently:
• check on cross ventilation in room or make up air.
• excessive amount of smoke is being created; check instructions for grilling,
trimming meats (see p. 18).
• outside wall cap may be trapped shut.
• range may be improperly installed; check ducting information (see p. 48).
• air filter may be improperly installed (see p. 13).
If oven does not heat:
• the SELECTOR and/or TEMPERATURE knobs may be set incorrectly.
• clock controls may be set for delayed start of oven.
If the oven light does not work:
• the light bulb is loose or defective.
• oven light does not work during self-cleaning process.
5O