Filter
Top Products
©2004 Maytag Services 16023522 A– 4
Installation Instructions (Models CPL1100AD*, CGL1100AD*)
-2-
INSTALLATION
Check the range model number plate to see if the range is
approved for installation in mobile homes and/or
recreational park trailers. If approved the following items
are applicable.
MOBILE HOMES
The installation of a range designed for mobile home
installation must conform with the Manufactured Home
Construction and Safety Standard, Title 24 CFR, Part
3280 (formerly the Federal Standard for Mobile Home
Construction and Safety, Title 24 HUD, Part 280) or, when
such standard is not applicable, the Standard for
Manufactured Home Installations ANSI A225.1/NFPA
501A, or with local codes.
In Canada the range must be installed in accordance with
the current CSA Standard C22.1 - Canadian Electrical
Code Part 1 and Section Z240.4.1 - Installation
Requirements for Gas Burning Appliances in Mobile
Homes (CSA Standard CAN/CSA - Z240MH).
RECREATIONAL PARK TRAILERS
The installation of a range designed for recreational park
trailers must conform with state or other codes or, in the
absence of such codes, with the Standard for
Recreational Park Trailers, ANSI A119.5-latest addition.
In Canada the range must be installed in accordance with
Section C22.2 No. 148/CAN/CSA - Z240.6.2 - Electrical
Requirements for R.V.’s (CSA Standard CAN/CSA - Z240
RV Series) and Section Z240.4.2 - Installation
Requirements for Propane Appliances and Equipment in
R.V.’s (CSA Standard CAN/CSA - Z240 RV Series).
REMOVAL OF SHIPPING & PACKING
a. Using carton corner posts (4), folded flat and stacked
two high to protect floor, lay range on its back.
Remove the four screws which attach skid to base of
range.
b. Stand range upright.
c. Remove all packing material, tape and protective film
on some chrome plated or stainless steel parts before
range is installed.
INSTALLATION DRAWINGS