Filter
Top Products
6
ENGLISH
SECTION 2 - INSTALLATION
WARNING
Keep the appliance area free and clear of combustibles.
WARNING
Do not obstruct the flow of combustion and ventilation air to and from your oven. There must be no
obstructions around or underneath the oven. Constructional changes to the area where the oven is
installed shall not affect the air supply to the oven.
CAUTION
For additional installation information, contact your local Authorized Service Agent.
NOTE
There must be adequate clearance between the oven and combustible construction. Clearance
must also be provided for servicing and for proper operation.
NOTE
An electrical wiring diagram for the oven is located inside the machinery compartment.
NOTE
Four casters are provided to allow the oven to be more easily moved to the installation location. These
casters are intended to simplify pre-installation movement only, and are NOT suitable for use as part of the
oven installation. During the installation procedure, the casters MUST be removed, so that the oven can be
supported by the supplied 152mm adjustable legs.
NOTE
All aspects of the oven installation, including placement, utility connections, and ventilation requirements,
must conform with any applicable local, national, or international codes. These codes supercede the require-
ments and guidelines provided in this manual.
WARNING
The oven must be installed on an even (level) non-flammable flooring and any adjacent walls must
be non-flammable. Recommended minimum clearances are specified in the Description section of
this Manual.
WARNING
For electric ovens, after any conversions, readjustments, or service work on the oven, check that the
ventilation system (if so equipped) is in operation.
WARNING - For gas ovens, after any conversions, readjustments, or service work on the oven:
Perform a gas leak test.
Test for correct air supply.
Test for proper combustion and gas supply.
Check that the ventilation system is in operation.