Filter
Top Products
The flavour of the coffee produced
depends on the type of coffee, how
finely the beans are ground and the
quantity of water used. You can
programme the amount of water used
for each portion of espresso, coffee or
hot water to suit your taste and your
cups.
A newly saved portion size applies to
the currently selected drink type. It is
not distinguished by coffee type or
chamber.
There is a maximum amount which can
be programmed for each type of drink.
Preparation stops when this is reached.
The maximum amount possible for that
type of drink will then be saved.
The changed portion size is always
saved in the current profile. The
name of the current profile is shown
in the top left of the display.
There are two ways of programming the
portion size, either:
–
with the drinks sensor while making a
coffee, or
–
by selecting "Portion size" in the
Settings menu.
If there is insufficient water in the
water container, the process will be
stopped and the amount will not be
saved.
Changing the portion size
while making a drink
Touch the ., / and y sensors for at
least 3 seconds to start portion size
programming.
^
Place the desired cup under the
central spout.
^
Touch the sensor for the drink you
want until "Change" appears in the
display.
The desired drink will be prepared and
"Save" will appear in the display.
^ Touch the OK sensor when the cup
has been filled to the level you want.
The portion size you have saved will
now be dispensed every time that
particular drink is selected.
Tip: You can cancel the portion size
programming as long as "Stop" is
visible in the display.
Changing the portion sizes
32