Filter
Top Products
It can also be combined with other
Miele built-in appliances. If the coffee
machine is to be built in above another
appliance, there must be a full-width,
closed shelf between them.
Ventilation
Ensure that the back of the coffee
machine is sufficiently ventilated, so
that steam and warm air can dissipate
freely.
Otherwise condensation can build up
and damage the machine or the
housing unit.
Installation
Before installation make sure that
there is no power supply to the
machine. This also applies should it
ever need to be taken out of its
housing unit.
The machine may only be used
when it has been built in. It can only
be used in ambient temperatures of
+15 °C to +38 °C .
You will need two allen keys (size 3
and 5) for installing the machine.
Tip: It is useful to have somewhere at
the height of the niche to place the
machine on. This makes electrical
connection easier.
^
Using the large allen key, unscrew all
four feet underneath the machine out
by approx. 2 mm.
The feet can be unscrewed by up to
approx. 10 mm.
If the furniture unit walls are 19 mm
thick you will need to drill four holes in
the sides for securing the machine.
To mark the position of these holes:
^ Align the machine in the niche. Screw
the side socket screws inside the
machine in a little so that they make
indents in the side walls, and then
unscrew them again.
^
Take the machine out of the niche
and drill ø 4.5 mm holes,
approx. 2 mm deep where you made
the indentations.
Installation
73