Filter
Top Products
Switching on
^
Touch the On/Off sensor K.
Tip: If you do not want the water from
the rinsing process to flow into the drip
tray, place a suitable container
underneath the central spout before
preparing the first coffee of the day.
At first "Heating-up phase" appears in
the display and after the coffee
machine has heated up, the pipework
is rinsed out. Hot water will be
dispensed from the central spout.
If the coffee machine still has an
operating temperature higher than
60 °C , then rinsing will not take
place.
The machine will now align the capsule
carousel and check the chambers. You
will be able to hear this happening.
When the different types of coffee
appear in the display, you can prepare
a drink.
Switching off
^
Touch the On/Off sensor K.
If coffee has been dispensed, the
coffee machine will carry out a rinse
automatically before switching off.
Switching off for longer
periods of time
If the machine is not going to be used
for a longer period of time, e.g. whilst
on holiday
^
Empty the drip tray, the waste
container and the water container.
^
Clean all components thoroughly,
including the central spout cover a
and the drip catcher b in the
machine front.
^
Switch the machine off.
If you are leaving the front open while
the coffee machine is not in being
used for a long time, disconnect it
from the mains to save energy.
Switching on and off
22