Filter
Top Products
^
Reassemble the parts of the lid as
shown.
Check that the cappuccinatore is
correctly assembled
– and that there is no gap between the
two parts of the lid.
– Also make sure that the reassembled
lid is fitted onto the capuccinatore
jug correctly. The valve sits above
the cappuccinatore handle. If this is
not the case, the cappuccinatore will
not operate correctly.
Machine front
If soiling is not removed promptly it
could cause the surface of the
machine to alter or discolour.
Remove any soiling immediately.
Make sure that water cannot get in
behind the display.
All external surfaces are susceptible
to scratching. Scratches on glass
surfaces could even cause a
breakage.
Contact with unsuitable cleaning
agents can discolour the surfaces.
Wipe up any spillages or splashes
of descaling agent immediately.
^ Switch the machine off with the
On/Off sensor K.
^ Clean the casing with a clean, soft
sponge and hot water with a little
washing-up liquid. Dry using a soft
cloth.
Tip: You can also use a microfibre cloth
to clean the front.
Cleaning and care
53