Filter
Top Products
The duo dispenser incorporated in the
door has a capacity of approximately
2 x 180 ml. for liquid agents.
Rinsing agent is necessary to ensure
water does not cling and leave marks
on items during the drying phase, and
to help items dry faster after they have
been washed.
Rinsing agent is poured into the
storage reservoirs and the amount set
is dispensed automatically.
,
Inadvertently filling the reservoirs
with powder or liquid detergent
always causes serious damage to
the reservoirs.
The reservoirs must be filled with
rinsing agent
when the H indicator light
comes on.
There is also a level indicator for the
reservoirs on the inside of the door (see
illustration on the next page).
^
Open the door fully
.
^ Undo the screw caps.
^
Pour rinsing agent into the reservoirs
until the level indicator is dark (see
arrow in the illustration). Use a funnel
if necessary.
^
Screw the cap back on and mop up
any spilt rinsing agent. This prevents
a build-up of foam occuring during
the next programme.
^
Wait until the H indicator light on the
control panel lights up again before
adding any more rinsing agent.
Adding rinsing agent
19