Filter
Top Products
Switching on
^
Close the door.
^
Open the stopcocks (if turned off).
^ Press the I-0 button.
When the programme selector is at the
STOP position f a point lights up in the
display field.
Starting a programme
^ Turn the programme selector
clockwise or anti-clockwise to the
required programme.
The temperature of the first wash of
the programme selected is shown in
the display, except with D
(PRE-RINSE) and 6 (DRAIN).
The indicator light next to the Start
button 6 flashes.
^
Select additional function DRYING
0 if required (see "Selecting an
additional function").
^
Press the Start button 6. The actual
temperature will appear in the
display.
The indicator light next to the Start
button lights up constantly.
Once the programme has started all
other programmes are blocked. If the
programme selector is then turned to
another programme, the values shown
in the display go out. The values can be
seen again if the programme selector is
turned back to the position of the
programme currently in operation.
^ During a programme, the ß button
can be used to toggle between
displaying the actual time, the
elapsed time and the active wash
block*).
*) depending on model:
1 = Pre-wash 1
2 = Pre-wash 2
3 = Main wash 1
4 = Main wash 2
5 = Chemical disinfection
6 = Rinse 1
7 = Rinse 2
8 = Rinse 3
9 = Rinse 4
10 = Final rinse 1
11 = Final rinse 2
12 = Drying TA
13 = Drying
Operation
30