Filter
Top Products
2. Altering the wash/rinse
temperature and/or the
temperature holding time in
the "Main wash" and "Final
rinse" programme stages
Please make a note of any changes
to the temperature and / or the
temperature holding time in the
appropriate section of the
programme chart
.
The programme chart shows the factory
settings for the Main wash temperature
together with temperature holding time
and the Final rinse temperature
with its
temperature holding time.
The special functions can be used to
alter the temperatures of the main wash
and of the final rinse from 30 °C - 93 °C
and the temperature holding time from
1-15 minutes.
^ Turn the programme selector to STOP
f.
^
Switch off the machine.
^
Press and hold ß and 6 at the
same time, and whilst doing so,
switch the machine on with the I-0
button.
The current programme status "P..."
will appear in the display and the p /
6 indicator light will come on.
“Main wash” temperature
(programme specific parameter):
^
Press 0 as often as necessary or
hold it pressed in until E09
(programming level 9) appears in the
display.
^
Turn the programme selector to the
programme which needs to be
changed. The current value appears
in the display after °C.
^
Press ß or hold pressed in until the
required value appears in the display.
Main wash temperature holding time
(programme specific parameter):
^ Turn the programme selector to STOP
f.
^ Press 0 as often as necessary or
hold it pressed in until E10
(programming level 10) appears in
the display.
^ Turn the programme selector back to
the programme which needs to be
changed. The current value appears
in the display after min.
^
Press ß or hold pressed in until the
required value appears in the display.
Programming special functions
35