Filter
Top Products
Cleaning the drain pump and
non-return valve
If water has not been pumped away at
the end of a programme the drain
pump or the non-return valve might be
blocked. They are however, easy to
clean.
^
Take the filter combination out of the
wash cabinet.
^ Release the locking clamp.
^
Lift up the non-return valve and rinse
under running water.
The drain pump is situated under the
non-return valve (see arrow).
^ Before replacing the non-return valve
check that the drain pump is free of
obstructions.
^ Carefully replace the ron-return valve
and secure with the locking clamp.
For safety reasons you should clean
the load again.
Cleaning and care
41