Filter
Top Products
Changing a programme
Provided the Start button has not yet
been pressed, a wrongly selected
programme may be changed as
described below (if it has been
pressed, see "Cancelling a
programme"):
^
Turn the programme selector to the
required programme.
^
Select additional function DRYING
0 again if required (see "Selecting
an additional function").
^
Press the Start button 6.
Selecting an additional function
The following additional function can be
selected:
^ 0 DRYING
may be selected as an additional
function as soon as the programme
has been selected (except with D
PRE-RINSE and 6 DRAIN). Drying is
phased over 10 minutes. The total
running time of the programme
lengthens accordingly.
Programme sequence display
The indicator light for the active
programme stage lights up during the
programme.
k Reactivation
I Pre-wash
l Main wash
H Interim rinse / Final rinse
c Drying (additional function)
r End of programme
(Programme parameters have
been reached)
Programme end
The programme has ended when r
lights up constantly in the programme
sequence display and the Start
indicator light 6 has gone out. A "0"
appears in the middle of the display. All
the other indicator lights come on and
go out in sequence. At the same time a
buzzer sounds for a maximum of 30
seconds (standard setting). The buzzer
can be changed (see "Programming
special functions").
Use the ß button to call up the total
running time of a programme or the
actual temperature.
Switching off
^
Press and release the I-0 button.
Note:
As the machine is fitted with an
electro-thermal door lock, the door can
only be opened if the I-0 button is
pressed in (see "Opening and closing
the door").
Operation
31