Filter
Top Products
For future servicing work, please
document any alterations to the stan
-
dard factory settings.
Enter any alterations in the field
Value set:_________.
General notes:
–
Switch positions that have not been
allocated a function are indicated in
the middle part of the display by a
bar (
- ).
–
The programming level is called up
via the STOP position f .
– A number of global parameters and
programme specific parameters
can be altered.
Settings and alterations to global
parameters (setting concentration
levels for DOS 1) apply to all
programmes in which the parameter
is found.
Setting and altering programme
specific parameters (Wash/Rinse
temperatures and temperature
holding times: Main wash and Final
rinse) only applies to the
programme in which this parameter
is found.
1. Setting the dosage
concentration and venting the
dispensing system
^
Turn the programme selector to STOP
f.
^
Switch off the machine.
^
Press and hold ß and 6 at the
same time, and whilst doing so,
switch the machine on with the I-0
button.
The current programme status "P..."
will appear in the display and the p /
6 indicator light will come on.
^ Press 0 twice, E02 for programming
level 2 will appear in the display.
Programming special functions
33