Filter
Top Products
Filling the salt reservoir
Only special, coarse-grained
reactivation salt* should be used in
this machine.
*Available from Miele. Please see
back page for more information.
Do not use other types of salt, e.g. table
salt, agricultural or gritting salt. These
could contain components which are
insoluble in water and could damage
the water softener. If in doubt consult
the Miele Professional Department.
The salt reservoir holds about 2 kg of
salt.
,
Inadvertently filling the salt
reservoir with detergent will damage
the water softener.
Before filling, make sure that you are
using reactivation salt.
^ Remove the lower basket.
^
Unscrew the salt reservoir cap.
,
Filling the salt reservoir with
salt for the first time:
Fill the reservoir with approx. 2 liters
of water first.
^
Place the supplied funnel over the
salt reservoir.
^ Carefully fill with reactivation salt.
Displaced water will run out as it is
being filled.
Water softener
16