Filter
Top Products
Setting the dosage
Set the dosage according to the
detergent manufacturer's
recommendations.
The machine needs 5.4 liters of water
for the main wash stage of the program.
Example:
A detergent manufacturer recommends
4 ml of cleaning agent per liter of water:
5.4lx4ml/l = 21.6 ml.
2 ml of cleaning agent will take about
1 second to dispense;
i.e. program to 11 seconds.
^ Use the program selection buttons
%$ to select the value that
corresponds with the desired
dispensing time.
% = button to select a lower value.
$ = button to increase the value.
The selected value is displayed.
Saving the settings
^
Press the "Start/Stop" button twice.
The indicator beside the "Start/Stop"
button will flash.
The programmed dispensing time is
stored in memory.
^
Turn the dishwasher off with the
"On/Off" button.
Value set:
Venting the dispensing system
^
Access the DOS programming level.
^
Press the "Start delay" button once.
"do1" will appear in the display.
^
Press the "Start delay" button again.
The venting process will be carried out.
The remaining time will appear in the
display.
At the end of the time 0 will appear in
the display. The dispensing system has
now been vented.
^ Turn the machine off with the
"On/Off" button.
Immediately after venting
^ Start the "Pre-wash" program so that
any agents in the wash cabinet are
diluted and drained away.
Programming special functions
39