Filter
Top Products
Cleaning the water inlet filter
A filter is incorporated in the screw
connection of the valve on the water
inlet hose. The filter must be cleaned
when dirty, otherwise the water flowing
into the wash cabinet is insufficient.
,
The plastic housing of the water
connection contains an electrical
component. It must not be
submerged in water.
If the mains water contains a large
number of insoluble substances, we
recommend fitting a large-area filter in
the connection between the water
faucet and the water inlet hose
threaded union.
This filter is available from your Miele
dealer or Miele.
Cleaning the filter
^ Disconnect the machine from
electricity (unplug it or "trip" the
circuit breaker).
^
Close the water supply.
^
Unscrew the inlet hose.
^
Carefully remove the seal.
^ Remove the filter using needle nose
pliers and rinse clean under running
water.
^ Replace the filter and seal, making
sure they are sitting correctly.
^ Reconnect the inlet hose to the water
supply, making sure it goes on
correctly and is not cross-threaded.
^
Turn on the water supply gradually to
test for leaks.
Cleaning and care
54