Loading the machine
Removing excess soils
^
Scrape food from dishes before
placing them in the dishwasher.
Inadequate pre-cleaning can clog
the filters and interrupt the wash
program.
Important
–
Select baskets and inserts which are
appropriate for the application.
–
Load items so that water can reach
all surfaces.
– Do not place dishes or cutlery inside
other pieces.
– Hollow items such as cups, glasses,
pots, etc. should be placed upside
down in the respective inserts.
Hollow vessels should be inverted
and placed in the correct inserts.
– Concave based items such as mugs
or bowls, should be placed at an
angle so that water does not pool.
–
To ensure good water coverage, tall,
narrow and hollow items should be
placed in the center of the baskets
rather than in the corners. Do not
obscure them with larger items
below.
–
The spray arms must not be blocked
by items that are too tall or hang
through the baskets. Check
clearance by manually rotating the
spray arms.
–
Small items should be placed on the
cup racks in the upper basket. Do
not obscure them with larger items
below, e.g. place bowls on the rack
above the cups so that water
reaches all items.
–
Do not place very tall items in the
front right hand area of the lower
basket as these would prevent the
detergent dispenser lid from
opening.
–
Cutlery can be placed in any order in
the cutlery holders however, for the
best cleaning and drying results,
place the cutlery in the inserts with
the handles down.
,
Be careful when sorting items
with sharp pointed ends. Position
them in the machine so that you do
not hurt yourself or create a danger
for others. Sharp knives, forks, etc.
should be placed in baskets with the
pointed ends facing downwards.
Use
20