Filter
Top Products
Selecting options
^
If desired, select the "Start delay" or
"Extra drying" options (see "Options").
Starting a program
^
Press the "Start/Stop" button.
The program will start. The "Start/Stop"
indicator and the indicator next to the
last program selected will come on. The
sequence indicator for the current
program stage reached will also come
on.
Do not finish a program prematurely.
Important program stages (e.g.
reactivating the water softener)
could be omitted.
Program sequence indicators
After a program has been started, the
current stage of the program is
indicated by the program sequence
indicators.
The indicator for the active program
stage lights up during the program.
"Wash": Main wash / Rinses
"Extra drying": Drying (Options)
Display
The duration of the selected program
appears in hours and minutes in the
display before the program begins.
During the program the time left until
the end of the program is displayed.
The time displayed may vary with the
same program. This is due to the water
inlet temperature at each intake.
When a program is selected for the first
time, the display shows an average
time for a cold water intake.
Each time a program is run, the
electronic takes the water temperature
and the size of the load into account
and calculates the required time. This
new duration is displayed when this
program is selected the next time.
Use
29