Filter
Top Products
^
Clean any excess salt from the
thread and seal.
^ Screw the cap on firmly.
^ Close the door.
^ Immediately run the "Pre-wash"
program to remove any traces of salt
from the cabinet.
Recharge indicator
The reactivation salt needs to be
replenished when the "Recharge"
indicator lights.
After the reservoir has been filled, the
water softener is automatically
reactivated the next time the
dishwasher is run. The salt indicator
may still light during this process. It will
go out once the salt concentration has
reached the correct level.
Water softener
17