Filter
Top Products
Special function 2
Increasing the water level
It is not possible to change settings
while a program is running. You will
have to cancel the program. The
"Start/Stop" indicator must be
flashing.
The amount of water taken into the
machine at each intake can be
increased by 20 %.
Accessing the programming level
^
Turn the dishwasher off with the
"On/Off" button.
^
Press and hold the "Extra drying"
and "Start/Stop" buttons, at the same
time, turn the dishwasher on with the
"On/Off" button.
^
Release these buttons.
The "Wash" indicator will come on and
the "Recharge" indicator will flash.
If they do not come on, restart the
procedure.
The set water hardness will then appear
in the display.
^ Press the "Extra drying" button twice.
Special function 1 "Rinse temperature
increased" is displayed in double digits
(10 or 11).
^ Press the % button until 20 or 21
appears in the display.
The programming level is accessed.
The "Spray arm" indicator comes on,
the "Midi" (G 8050) / the "Economy"
(PG 8050i) program indicator will come
on or flash and the "Recharge" indicator
will flash.
Special function 2 "Increasing the water
level" is selected and indicated with
two-digit numbers in the display.
Programming special functions
42