Filter
Top Products
The G 8050 / PG 8050i comes
equipped with a 14/3 AWG cord and
plug for connection to a standard 120
V, 60 Hz AC power outlet.
If available, the dishwasher may be
connected to a 208/240V single phase
power supply. This will increase the
power to the heating elements and
shorten the time of selected wash
cycle.
120V 208V 240V
Rated Load (kW) 1.5 3.6 4.0
Fuse Rating 15A 20A 20A
To connect the machine to a 208/240V
supply, the standard power cord must
be removed and replaced by a 10/4
AWG SJ or SJO cable. A 3 pole, 4-wire
grounding plug and receptacle are
recommended (NEMA Type 14-20R
and 14-20P).
The conversion diagram and wiring
diagram are secured to the inner side
of the toe kick.
Removing the toe kick
Disconnect the machine from the
mains electrical supply.
^
Remove the fixing screws from the
toe kick and take it off.
Power connection options
Electrical connection
68