Filter
Top Products
Special function 5
Setting the heating power
It is not possible to change settings
while a program is running. You will
have to cancel the program. The
"Start/Stop" indicator must be
flashing.
The heating power can only be
altered when the rinse temperature is
set to 85°C, see "Special function 1".
The heating power is factory set to
1.3 kW.
If the dishwasher is set to a higher
heating power (see "Electrical
connection"), the heating power must
be adjusted in this special function.
Accessing the programming level
^
Turn the dishwasher off with the
"On/Off" button.
^
Press and hold the "Extra drying"
and "Start/Stop" buttons, at the same
time, turn the dishwasher on with the
"On/Off" button.
The "Wash" indicator will come on and
the "Recharge" indicator will flash.
If they do not come on, restart the
procedure.
The set water hardness will then appear
in the display.
^ Press the "Extra drying" button twice.
Special function 1 "Rinse aid
temperature increased" is displayed in
double digits (10 or 11).
^ Press the % button until 50 or 51
appears in the display.
The "Spray arm" indicator will come on,
the "Beer Glasses" program indicator
will come on or flash and the
"Recharge" indicator will flash.
Special function 5 "Setting the heating
power" is selected and indicated with
two-digit numbers in the display.
Programming special functions
48