Filter
Top Products
Interrupting a program
A program is interrupted as soon as the
door is opened.
If the door is closed again, the program
will continue from the point it was at
before the door was opened.
,
Water in the dishwasher may be
hot. Danger of scalding!
Only open the door if absolutely
necessary and exercise extreme
caution when doing so. Before
closing the door again, leave it ajar
for approx. 20 seconds. This will
enable the temperature in the wash
cabinet to settle. Then close the
door firmly making sure that it clicks
into place.
Changing a program
Important:
If the detergent dispenser flap has
already opened, do not change the
program.
If a program has already started
^
Press the "Start/Stop" button for at
least one second.
The program will be canceled and the
"Start/Stop" indicator will flash.
^
Use the program selection buttons
%$ to select a different program.
The indicator next to the program
selected will come on.
^ Select the "Extra drying" and "Start
delay" options again if desired (see
"Options").
^ Press the "Start/Stop" button.
The program will begin.
Use
31