Filter
Top Products
Special function 3
Display time or temperature
It is not possible to change settings
while a program is running. You will
have to cancel the program. The
"Start/Stop" indicator must be
flashing.
The display can either show the time or
temperature.
Factory default setting is the time.
Accessing the programming level
^
Turn the dishwasher off with the
"On/Off" button.
^
Press and hold the "Extra drying"
and "Start/Stop" buttons, at the same
time, turn the dishwasher on with the
"On/Off" button.
^
Release these buttons.
The "Wash" indicator will come on and
the "Recharge" indicator will flash.
If they do not come on, restart the
procedure.
The set water hardness will then appear
in the display.
^ Press the "Extra drying" button twice.
Special function 1 "Rinse temperature
increased" is displayed in double digits
(10 or 11).
^ Press the % button until 30 or 31
appears in the display.
The programming level is accessed.
The "Spray arm" indicator will come on,
the "Maxi" (G 8050) / the "Normal"
(PG 8050i) program indicator will come
on or flash and the "Recharge" indicator
will flash.
Special function 3 "Display time or
temperature" is selected and indicated
with two-digit numbers in the display.
Programming special functions
44