Miele G 886 Dishwasher User Manual


 
Choosing a program
Program selection
Choose a wash program depending on
the type of dishes and the degree of
soiling.
In most cases the “Light Wash”, “Nor
-
mal” or “Sani Wash” program will give
excellent results.
Available programs and their applica
-
tions are listed in the Program Chart.
The “Top Solo” feature can be used
with each of these programs.
For further information on “Top Solo”,
see “Additional features”.
“Energy Saver” Program
Approximately 0.20 kWh of electricity is
used during this cycle.
^
Use this program for light to normally
soiled dishes. The water is not
heated in this program.
The dishwasher must be connected
to hot water of at least 45 °C/115 °F
for this program to clean well.
The drying result may not match that of
a program with a full drying cycle.
The higher the temperature of the in
-
coming water, the better the washing
and drying results will be.
^ Opening the door of the dishwasher
2-3 inches (5-6 mm) at the end of the
program will speed drying.
Operating the dishwasher
30