Filter
Top Products
Problem Possible cause Remedy
The indicator light
“Intake/Drain” is flash
-
ing and the program
does not continue
Before fixing the problem
you must:
–
Turn the program se
-
lector to the “Stop” po
-
sition.
–
Turn the dishwasher off
using the “On/Off” but
-
ton.
Water intake is restricted.
–
Open the water valve
completely.
–
Check the water inlet
filter and clean if nec
-
essary, see “Cleaning
the water inlet filter”.
Water outlet is restricted,
water remains in the wash
cabinet at the end of a
program.
– Clean the filter combi-
nation, see “Cleaning
and Care”.
– Clean the drain pump,
see “Cleaning the drain
pump and non-return
valve”.
– Clean the non-return
valve, see “Cleaning
the drain pump and
non-return valve”.
–
Remove any kink in the
drain hose.
Knocking noise
The spray arm is hitting
something in the basket.
Interrupt the program,
rearrange items blocking
the spray arms.
Rattling noise
Dishes are not secure in
-
side the dishwasher.
Interrupt the program and
rearrange dishes.
Problem solving guide
46