Filter
Top Products
Interrupting a program
A program is interrupted as soon as the
door is opened.
If the door is closed again, the program
will continue from the point it was at be
-
fore the door was opened.
Warning:
Water in the dishwasher may be
hot. There is a danger of being
burned!
Only open the door if absolutely
necessary and exercise extreme
caution when doing so. Before
closing the door again, leave it
ajar for approximately 20 seconds.
This will allow the temperature in
the wash cabinet to settle. Close
the door firmly until it clicks into
place.
Changing a program
If a program has already started and
you wish to change it proceed as fol
-
lows:
^
Turn the program selector (18) to the
“Stop” position.
^
Leave the program selector (18) in
this position for at least one second.
^
Then turn the program selector (18)
to the program you wish to use.
^
Press the “Start” button (21).
The program starts.
Operating the dishwasher
34