Filter
Top Products
At the end of a program
A program has finished when there are
no indicator lights illuminated in the
program sequence display (16) and “0”
appears in the time display (15).
The dishwasher can now be opened
and unloaded (see “Unloading the
dishwasher”).
If the dishwasher is not opened the fan
will continue for a few more minutes to
remove any remaining moisture. This
process is not part of the program time.
Only open the door immediately after a
program has ended if dishes or cutlery
are urgently needed.
Always turn the dishwasher off if an-
other program will not be started imme-
diately.
Turning off the dishwasher
At the end of a program:
^
Turn the program selector (18) to
“Stop”.
The decimal point in the time display
(15) and the light ring around the pro
-
gram selector light.
^
Press and release the “On/Off” but
-
ton (14).
The decimal point in the time display
(15) and the light ring around the pro
-
gram selector go out.
The dishwasher continues to use
electricity until turned off using the
“On/Off” button.
If the dishwasher is not to be used for a
longer period of time, e. g. while vaca-
tioning, the water valve should be
turned off.
Operating the dishwasher
33