Filter
Top Products
Turning on the dishwasher
^
Check that the spray arms are not
blocked.
^ Close the door.
^ Open the water valve, if closed.
^ Press the “On/Off” button (14).
The light ring around the program se-
lector (18) and the decimal point in the
time display (15) light.
Starting a program
^
When selecting a program, refer to
the program chart of the operating
instructions.
^
Turn the program selector (18) clock
-
wise or counterclockwise to the se
-
lected program.
The running time of the program se
-
lected shows in the time display (15) in
hours and minutes. The “Time Left” in
-
dicator light next to the time display
(15) and the “Start” indicator (21) light
up.
Note:
If selecting “Delay Start” or “Top Solo”
this must be done before the program
is started (see “Additional features”).
^ Press the “Start” button (21).
The program begins. The “Start” indica-
tor light (21) goes out and the “Pre-
wash” or “Main Wash” indicator light
(16) comes on.
Do not finish a program prematurely
or important program stages (e. g.
reactivating the water softener)
could be omitted.
Operating the dishwasher
31