^
Press the “Start” button (21).
The “Start” indicator (21) goes out, and
the light ring goes out 10 minutes later.
If one of the buttons on the control
panel is pressed or the program selec
-
tor is turned during the delay start pe
-
riod the light ring will be lit for another
10 minutes.
For delayed start times greater than
10 hours the delay time counts down in
1 hour periods until the delay start time
has elapsed and in minutes for delay
start periods under 10 hours.
Once the delay start period has
elapsed the selected program begins
automatically. The time left for a pro-
gram to run then shows in the display,
the “Delay Start” indicator light goes out
and the “Time Left” indicator and the
light ring illuminate.
How the delay start time is shown
in the time display:
up to 59 minutes:
example - 30 minutes = 30
between 1 hour and 9 hours 30 min
-
utes:
example - 5 hours = 5.00
10 hours and over:
example - 15 hours = 15h
To prevent children from coming into
contact with dishwasher detergent:
Only fill the detergent dispenser im
-
mediately before starting the pro
-
gram, i.e. before pressing the “Start”
button, and activate the child safety
lock.
When using the “Delay Start” func
-
tion, make sure that the compart
-
ment is dry before adding deter
-
gent. Wipe dry with a cloth if
necessary.
Starting a program before the delay
start period has elapsed:
A program can be started before the
delay start period has elapsed. Pro
-
ceed as follows:
^
Turn the program selector (18) to
“Stop”.
^ Hold the selector in this position for
at least one second.
The “Delay Start” indicator light (19)
goes out.
^ Turn the program selector (18) to the
selected program.
Note:
If “Top Solo“ was selected, then you will
need to select it again.
^
Press the “Start” button (21).
The program starts. The “Start“ indica
-
tor light (21) goes out and the
“Prewash” or “Main wash” indicator
light (16) comes on.
Operating the dishwasher
38