Filter
Top Products
Problem solving guide
With the aid of the following guide, minor problems can be corrected without a
service call.
Repairs should only be carried out by a qualified and trained person in accor
-
dance with local and national safety regulations. Unauthorized or incorrect re
-
pairs could cause personal injury or damage the machine.
Problem Possible cause Remedy
The light ring around
the program selector
and the decimal point in
the time display do not
light, after the machine
has been turned on us-
ing the “On/Off” button
The door is not properly
closed.
Close the door firmly.
The dishwasher is not
plugged in.
Insert the plug.
The fuse is defective or
has tripped.
Reset the circuit breaker.
The dishwasher stops
during a program
The fuse has tripped. Reset the circuit breaker.
The “Spray arm” indica-
tor light is flashing
Tall items are blocking
the middle spray arm.
Open the door and rear-
range items blocking the
spray arm.
The middle spray arm jets
are blocked.
Before fixing the problem
you must:
–
Turn the program se
-
lector to the “Stop” po
-
sition,
–
Turn the dishwasher
off with the “On/Off”
button,
then:
–
Clean the spray arm.
Problem solving guide
44