Filter
Top Products
20
<When the AK-HC1500 camera is used>
Attach the positioning 1 screw
(supplied) to the
camera mount
.
Attach the camera mount
using the 2 screws
, flat
washers
and spring washers
(supplied).
(The camera mount points toward the front or back in
the opposite way from a convertible camera. For pointing
upward or downward, make sure that the two sides of the
camera mount are higher
— which is the opposite from
when the AK-HC910 is used — than the central area that
is attached.)
Attach the lens to the camera.
Remove the lens hood and zoom lever
.
Installation
To ensure that none of the screws are loose,
use a tool to tighten them up securely.
The camera mount in the opposite direction from
when the AK-HC910 is used as the camera.