Filter
Top Products
31
Connections
Example of connections when using a multi purpose camera
<Concerning iris control>
Iris operation AW-RP655 AK-HRP150
AUTO AUTO AUTO
AK-HRP150 MANUAL AUTO MANUAL
AW-RP655 MANUAL
MANUAL (
)
—
Set to MANUAL when using the presets and tracing memory.
• Since the iris control of the AK-HRP150 and AW-RP655 is not coordinated, it may vary significantly when it is operated
initially after the controller used to exercise control has been switched.
• The IRIS indicator on the AW-RP655 can be displayed only when the iris data can be imported from the camera; when it
cannot be imported, the CLOSE display appears or no display appears but this does not mean that something is wrong with
the iris control.
• When the AK-HC1500 is used, no signals are output from the Y/PR/PB connectors.
Pb
MULTI
RJ-45 relay adapter
Multi function controller
AW-RP655
POWER
Outdoor
pan/tilt head
AW-PH650
Monitor
10BASE-T (UTP category 5)
straight cable
Pr
G/L input
SDI
OUT
To be locally
purchased
Y
D-SUB
15pin
AC adapter
AW-PS505A
Camera controller
AK-HRP150/AK-HRP900
Precautions when using the AK-HC910
The AK-HC910 is capable of outputting HD-SDI signals and Y/PB/PR signals, but when the Y/PB/PR signals are used as the
main line, do not connect any signals to the SDI IN/OUT connector.
Connect signals to the SDI OUT connector only when using HD-SDI signals as the main line.