Filter
Top Products
Solstice I12+ Cooking Computer for ROV Fryers
Pitco P/N 60149517 & 60149518
L22-378 Rev 3 Page 30 of 44
9 To Enter Factory Menu Level 4 (for the Technician):
With no cook timers running, displays will show one of the following displays:
,
, or .
Press the key. The left display will show . The
right display will be blank.
Enter password using the product keys as a numeric keypad
for entry.
Display will show . Product key indicators
will illuminate to prompt operator to select a key. This
section details parameters that may be changed in Level 4
programming.
9.1 Pitco Collect (toggle)
With display showing press product key L.
Display shows [PCOLLECT] [OFF ]. This toggle forces the RS-485 link to output
data collection parameters during test, and calibration. This has no meaningful use in
the field. Do not change this setting. Factory shipped default is OFF.
To change this value, use the 0 key to select a new value.
Press the key. Display returns to .
9.2 Offset Temperature Display:
With display showing , press product key 1. See section 8.1 for
Offset Temperature Display.
9.3 Melt Cycle ON Time:
With display showing , press product key 2. See section 8.2
for Melt Cycle ON Time.
9.4 Minimum ON and OFF Cycle Time:
With display showing , press product key 3. See section 8.3
for Minimum ON and OFF Cycle Time.
9.5 Recovery Test Values:
With display showing , press product key 4. See section 8.4
for Recovery Times.
9.6 Diagnostic Menu Entry:
With display showing , press product key 5. See section 8.5
for Diagnostic Menu.