Filter
Top Products
Solstice I12+ Cooking Computer for ROV Fryers
Pitco P/N 60149517 & 60149518
Page 31 of 44 L22-378 Rev 3
9.7 Ready Level:
With display showing , press product key 6. See section 8.6
for Ready Level.
9.8 Operating Temperature Range:
With display showing , press product key 7. See section 8.7
for Temperature Operating Range.
9.9 High Limit Value:
With display showing press product key 8.
Pressing product key 8 shows the temperature above the set
temperature, where the high limit alarm will sound. This is for display
only, this value cannot be changed with a keypad entry.
Press the key. Display now shows .
Note: Factory default value is 40°F over set temperature, or 410°F absolute,
whichever is less.
9.10 Number of Basket Lift:
With the display showing ; press key 9. See section 8.9
for Number of Basket Lift.
9.11 Test On/Off:
With display showing press product key 10/0.
Display shows [TEST xx], where “xx” is ON or OFF. If ON is selected, temperatures
displayed by the controller are probe tip temperatures unaltered by values set in
section 4.1, or 5.1. For normal operations, this setting should remain OFF.
To change this value, use product key 0 to toggle choice (ON or OFF).
Press the key. Display now shows .
9.12 To Exit Factory Menu (Level 4):
To exit Factory Programming, Press the key. Display will show . Continue with
settings in section 2 or 3, or exit in the next step.
To return to normal operations, press the key again.
Display shows ,
, or . .